Descriptions of open source networking software for Linux or BSD systems: configuration, operation, maintenance
In Part 1 of this series, we performed some practical experiments to show how interfaces in an IPv6 network configure themselves with link-local IPv6 addresses when they start up. We also showed how to manually configure IPv6 addresses on a Linux system. In this post, we will use an open-source network simulator to demonstrate another […]
IPv6 addressing is about more than just a longer 128-bit address length. The working groups that defined IPv6 were trying to solve some of the problems that programmers, network administrators, and network engineers were encountering with IPv4. The way that IPv6 prefixes and addresses are assigned and configured differs significantly from IPv4. IPv6 offers some
Previously, we installed the CORE Network Emulator from source code and installed the network services used by CORE. Now, we want to run a simulated networking scenario and modify the configuration of the quagga routing daemon on one or more virtual routers. To do this, we open a shell to the node and start the
To emulate the operation of IP networks, the CORE Network Emulator requires that routing and networking software be installed on the host Linux system. CORE creates virtual nodes using the Linux Containers (LXC) network namespaces feature so all services installed in the host computer will be available to run on the virtual nodes created by
When I started a CORE Network Emulator simulation scenario on my computer running the Xubuntu Linux 13.10 operating system, I encountered a few issues that I needed to correct. The Ubuntu Network Manager drops my WiFi connection after I start the CORE simulation scenario and the Terminal does not start when I double-click on a
TinyCore Linux is very suitable for devices like routers that require a higher level of security. All changes made to a running TinyCore Linux system exist only in system RAM and are lost when the system restarts or is shut down. Viruses or file corruption can be removed simply by rebooting the system. When used
Psimulator2 is a basic graphical network simulator created and used by the Czech Technical University in Prague, Faculty of Information Technology to teach basic networking topics. It will run on any system that supports Java, including Windows, Mac OS, and Linux. Each node created in the Psimulator2 network is a Java program that implements the
In a previous post, I showed how to install the Marionnet open-source network simulator on a Debian Linux system. Recently, I installed Marionnet on a Knoppix system so I can run it on any computer from a USB thumb drive. Knoppix is based on Debian but, by default, it uses the LXDE desktop environment instead
GNS3 can be used to simulate a network composed exclusively of open-source routers, switches, servers, and hosts. In this post, we will investigate how well GNS3 works when we use it strictly as an open-source network simulator, without using Cisco or Juniper routers in the simulation.